Desiccant Air Dryers (Heatless & Heated)

Heatless and heated regenerative desiccant dryers that reach very low pressure dew points for instrument air, food, pharmaceutical and electronics processes.

  • Capacity: 1.1 - 145 m3/m
  • Model: D66VLi - D7620VLi/D66VEi - D8700VEi

Heatless and heated regenerative desiccant air dryers

Working principle

A desiccant dryer uses two towers filled with desiccant. As compressed air passes through the active tower, moisture is adsorbed and the air is dried. Switching valves alternate the towers between drying and regeneration so the desiccant can be reused continuously.

Heatless desiccant dryer

A portion of the dried compressed air is diverted to regenerate the desiccant and is then discharged through a silencer. This type needs no external power for regeneration, so the initial investment is low, but purge-air consumption makes running cost higher.

Heated (micro-heat) desiccant dryer

The process is similar to a heatless dryer, but compressed air passes through an external heater before entering the regenerating tower, so the heated air can carry more moisture. The heater and related components raise the initial cost, but purge-air consumption is lower and so is running cost.

Desiccant Air Dryers (Heatless & Heated)

Desiccant Air Dryers (Heatless & Heated)

Refrigerated and desiccant dryers, coalescing filters and separators remove water and oil from compressed air. See the air treatment range to match dew point and air quality to your process.